Reverse Idler Gear Shaft Assembly Disassembly and Reassembly

NOTE: Prior to reassembling, clean all parts in solvent, dry them, and apply MTF to all contact surfaces.


1


4196_3.0_enu_14103442_3.0

*1
Check for wear and operation

1. Reverse Gear Holder - Remove


2. 20 mm Thrust Washer - Remove


3. 20 mm Thrust Needle Bearing - Remove


4. Needle Bearing - Remove


5. Reverse Driven Gear - Remove


6. 20 mm Thrust Needle Bearing - Remove


7. 20 mm Thrust Washer - Remove


8. 20 mm Thrust Needle Bearing - Remove


9. Reverse Synchro Sleeve - Remove


10. Needle Bearing - Remove


11. Reverse Drive Gear - Remove


12. 20 mm Thrust Needle Bearing - Remove


13. 20 mm Thrust Washer - Remove


14. 33 mm Spring Washer - Remove


15. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.