Front Seat Belt Buckle Removal and Installation
NOTE: SRS components are located in this area. Review the
SRS component locations
and the
precautions and procedures
before doing repairs or service.
1.
Front Seat - Remove
2.
Front Seat Belt Buckle - Remove
Power seat
Driver's Manual seat
Passenger's manual seat
1.
Remove the harness clips (A).
2.
Remove the harness clips (A).
3.
Remove the seat belt buckle (B).
3.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
NOTE: Assemble the wave washer (A), the plane washer (B), and the toothed lock washer (C) on the center anchor bolt (D) as shown.
