CVT Speed Sensor Removal and Installation
1. Speed Sensor - Exploded View

Speed Sensor - Exploded View



NOTE:
How to read the torque specifications.
Keep all foreign particles out of the transmission.

CVT Speed Sensor

1. CVT Speed Sensor - Remove
1.
Disconnect the connector (A).
2.
Remove the CVT speed sensor (B) with the O-ring (C).

2. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
NOTE:
Be sure to use a new O-ring which should be applied a light coat of clean transmission fluid before installation.
Check the connector for corrosion, dirt, or oil, and clean or repair if necessary.

CVT Drive Pulley Speed Sensor

2. CVT Drive Pulley Speed Sensor - Remove
1.
Disconnect the connector (A).
2.
Remove the CVT drive pulley speed sensor (B) with the O-ring (C).

3. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
NOTE:
Be sure to use a new O-ring which should be applied a light coat of clean transmission fluid before installation.
Check the connector for corrosion, dirt, or oil, and clean or repair if necessary.

Torque Converter Turbine Speed Sensor

5. Torque Converter Turbine Speed Sensor - Remove
1.
Disconnect the connector (A).
2.
Remove the torque converter turbine speed sensor (B) with the O-ring (C).

6. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
NOTE:
Be sure to use a new O-ring which should be applied a light coat of clean transmission fluid before installation.
Check the connector for corrosion, dirt, or oil, and clean or repair if necessary.